16x2-20x2 Eurocone Connection Stainless Steel Manifold Set with Flow Meter

Technical Data Sheet

Product Name	16×2-20×2 Eurocone Connection Stainless Steel Manifold Set with Flow Meter
Max. Working Temperature	90°C
Max. Pressure Class	Manifold (with Salmaster):10 Bar Manifold (Flow Meter):6 Bar
Intended Use	Heating Systems

Hole Number	Product Code (16×2)	Product Code (20×2)	Length L(mm)(+/2)
2	18881902	1883902	152
3	18881903	1883903	202
4	18881904	1883904	252
5	18881905	1883905	302
6	18881906	1883906	352
7	18881907	1883907	402
8	18881908	1883908	452
9	18881909	1883909	502
10	18881910	1883910	552
11	18881911	1883911	602
12	18881912	1883912	652

Technical Information Brochure

Download

Make sure there is no damage on the product may occur during transport and shipping. Before assembly do not unpack the product in order to prevent from the external effects.
Clean all kinds of contaminants before assembly.
Make sure that the thread length to be connected to the manifold is not too short or too long than the thread length of the manifold.
Install the Manifold to the system by the appropriate tools.
First, install the Nut,Ring and Socket to the hose, then screw the nut to the manifold by the appropriate tools.
Make sure the hose to be connected to the manifold is the correct size(16×2/17×2).
Observe the axiality during assembly.
The installation system that manifold connected must be protected against the freezing.
Manifold is suitable for use in heating systems and should not be used in flammable or combustible gas/liquid installations.
Do not paint the manifold, do not expose the manifold with abrasive chemicals, do not open or close with any other tool and do not remove the handle.