Installation and Operating Instructions
- Before assembly, do not remove it from the package until the moment of assembly to prevent foreign matter from entering the Compact mixing circuit that may affect its operation.
- Take precautions against any damage that may occur during transportation and shipment.
- Clean any foreign matter in your installation before installation.
- The compact mixing circuit must be in the closed position during installation.
- Make sure that the thread length to be connected to the collector is not too short or too long than the thread length on the collector.
- First, mount the hose to the collector. Grasp the collector assembly from the wrench opening and assemble it with a suitable wrench that will not damage it.
- Do not use excessive glue or any other unsuitable substance during installation.
- Do not paint the compact mixing circuit or contact it with corrosive chemicals.
- Do not use any other tool and do not remove the handle to open or close the compact mixing circuit.
- The compact mixing circuit must be replaced by the authorities in case of any damage or malfunction.
- It is mandatory to comply with the installation and usage instructions. Otherwise, the product will be out of warranty.
- Do not forget to get the warranty certificate. This document is only valid together with the corresponding invoice.