1’’ Drain Cock For Manifold with Automatic Air Vention
Technical Data Sheet
| Product Name | 1’’ Drain Cock For Manifold with Automatic Air Vention |
| Operation Temperature | Max. 110°C |
| Operation Pressure | Max. 10 bar |
| Intended Use | Water Installation |
Product Details
| Materials | |
|---|---|
| Body | Brass (CW617N)/(CW614N) |
| Nut | Brass (CW617N)/(CW614N) |
| Socket | Brass (CW617N)/(CW614N) |
| Automatic Air Vent | Brass (CW617N)/(CW614N) |
| Seals | NBR/EPDM |
| Dimensions | |
|---|---|
| Product Code | 18.09.351 |
| D1 | 1″ |
| D2 | M22x1,5 |
| L | 36 |
| H (Open) | 121 |
| H (Closed) | 130 |
| SW1 | 12 |
| SW2 | 24 |
| SW3 | 10 |
| Ø | 13,9 |
Technical Drawings
Documents
Installation and Operating Instructions
- Do not unpack the drain cock until installation to prevent falling of any unwanted substance that may affect the working of drain cock.
- Take measures against any possible damage that may occur during transport and shipment.
- Clean away every unwanted substance in your system before installation.
- While installing, grab the drain cock by the appropriate tool from the across flats where you’ll install it.
- During installation do not use any unsuitable substance.
- Do not paint the drain cock. Do not expose the drain cock with abbrasive chemicals.
- In case of any damage or disorder , drain cock should be changed by authorities.
- Complying with the installation and usage instruction is compulsory. Otherwise, the product will be out of guarantee.
- Do not forget to get the document of guarantee. This document is valid only with the related bill.
Other Products
PE-RT Pipe 5 Layer
PE-RT Pipe 3 Layer
1″ Stainless Steel Manifold with Automatic Air Vent
1″ Stainless Steel Manifold With AutomaticAir Vent
1” Stainless SteelManifold System Set
Circulation Pump – DN 25
Edge Insulation Tape 25m, 3mm x 100mm
Edge Insulation Tape 20m, 5mm x 100mm
U Clip Pipe Fixing Gun
