Get a Quote
Project Wizard

Get a Quote

Please enable JavaScript in your browser to complete this form.

1’’ Manifold

In hot/cold water installation systems, it ensures that the water coming from the feeder is distributed to other lines in the system or collected from other lines in the system.

Technical Data Sheet

Product Name1’’ Manifold
StandardTSE K 534 / TSEK
Max. Working Temperature120°C
Pressure ClassPN 10
Intended UseHeating Systems

Dimensions

582583584585586587588589590591592593
Hole2345678910111213
D1”1”1”1”1”1”1”1”1”1”1”1”
H1595959595959595959595959
H2343434343434343434343434
SW1242424242424242424242424
SW2242424242424242424242424
SW3383838383838383838383838
L1434343434343434343434343
L295,7138,7181,7224,7267,7310,7353,7396,7439,7482,7525,7568,7

Materials

BodyBrass (CW617N)/(CW614N)
ValveBrass (CW617N)/(CW614N)
CoverBrass (CW617N)/(CW614N)
NutBrass (CW617N)/(CW614N)
SocketBrass (CW617N)/(CW614N)
RingBrass (CW617N)/(CW614N)
Air VentBrass (CW617N)/(CW614N)
HandlePlastic
Gasket – OringNBR /EPDM

Surface Specs (Plating)

BodyNickel + Chrome
NippleNickel + Chrome
CoverNickel
NutNickel
Air VentNickel

Technical Information Brochure

Installation and Operating Instructions
  1. Make sure there is no damage on the product may occur during transport and shipping. Before assembly do not unpack the product in order to prevent from the external effects.
  2. Clean all kinds of contaminants before assembly.
  3. Make sure that the thread length to be connected to the manifold is not too short or too long than the thread length of the manifold.
  4. Install the Manifold to the system by the appropriate tools.
  5. First, install the Nut,Ring and Socket to the hose, then screw the nut to the manifold by the appropriate tools.
  6. Make sure the hose to be connected to the manifold is the correct size(16×2/17×2).
  7. Observe the axiality during assembly.
  8. The installation system that manifold connected must be protected against the freezing.
  9. Manifold is suitable for use in heating systems and should not be used in flammable or combustible gas/liquid installations.
  10. Do not paint the manifold, do not expose the manifold with abrasive chemicals, do not open or close with any other tool and do not remove the handle.

Other Products