1" Stainless Steel Manifold System Set

Technical Data Sheet

Product Name	1” Stainless Steel Manifold System Set
Working Temperature	Inlet: 120°C / Outlet: 90°C
Pressure Class	PN 10
Intended Use	Heating Systems

PART NUMBER	PART NAME	MATERIAL
1	Manifold Body	Stainless Steel
2	Flow Meter	High Quality Thermoplastic
3	Flow Meter Wheel	ABS
4	Automatic Air Vent	Brass
5	1” Blind Plug	Brass
6	Ball Valve	Brass
7	16×2 Pex Connection	Brass
8	Thermostatic Insert	Brass
9	Manual Control Cap of Thermostatic Insert	ABS
10	Holder	Steel

Dimensions are in “milimeter”

Technical Information Brochure

Download

Make sure there is no damage on the product may occur during transport and shipping. Before assembly do not unpack the product in order to prevent from the external effects.
Clean all kinds of contaminants before assembly.
Make sure that the thread length to be connected to the manifold is not too short or too long than the thread length of the manifold.
Install the Manifold to the system by the appropriate tools.
First, install the Nut,Ring and Socket to the hose, then screw the nut to the manifold by the appropriate tools.
Make sure the hose to be connected to the manifold is the correct size(16×2/17×2).
Observe the axiality during assembly.
The installation system that manifold connected must be protected against the freezing.
Manifold is suitable for use in heating systems and should not be used in flammable or combustible gas/liquid installations.
Do not paint the manifold, do not expose the manifold with abrasive chemicals, do not open or close with any other tool and do not remove the handle.

1″ Stainless Steel Manifold System Set