Bypass Mixing Circuit
Technical Data Sheet
| Product Name | Bypass Mixing Circuit |
| Product Code | 20.01.003 |
| Max. Fluid Temperature in Primary Circuit | 90°C (Except circulation pump) |
| Max. Working Pressure | PN 10 |
| Adjustment Range of Thermostatic Head | 20-60°C |
| Thermometer Measuring Range | 0-70°C |
| Capacity Coefficient of the Thermostatic Head at its Maximum Setting (Kv) | 2,75 m³/hours |
| Pump Connection Range | 180 mm |
| Bypass Valve Adjustment Range | 0,1 – 0,6 bar |
| Area of Use | Heating Systems |
Technical Drawings
| PART NAME | MATERIAL TYPE | MATERIAL SERIES |
|---|---|---|
| Main body parts, Connections, fittings, bypass group | Brass Casting, Brass hot forging | OTS 60Pb2, CW617N |
| Return Line, Capillary transmission pipe, Thermostatic Sensor | Nickel Plated Copper | DHP, CW024A |
| Connection O-Rings | Ethyl propylene elastomer | EPDM 70Sh |
| Bypass valve flywheel, Thermostatic head body, Protection Cover | Acrylonitrile – Butadiene – Styrene | ABS |
Documents
Installation and Operating Instructions
- Before assembly, do not remove it from the package until the moment of assembly, to prevent foreign matter from entering the bypass compact mixing circuit, which may affect its operation.
- Take precautions against any damage that may occur during transportation and shipment.
- Clean any foreign matter in your installation before installation.
- During installation, the valves on the bypass compact mixing circuit must be in the closed position.
- Do not use excessive glue or any other unsuitable substance during installation.
- Do not paint the bypass compact mixing circuit or contact it with corrosive chemicals.
- Do not use any other tool to open or close the bypass compact mixing circuit and do not remove the handles/flywheels of the valves.
- In case of any damage or malfunction in the bypass compact mixing circuit, it must be replaced by the authorities.
- It is mandatory to comply with the installation and usage instructions. Otherwise, the product will be out of warranty.
- Do not forget to get the warranty certificate. This document is only valid together with the corresponding invoice.
Other Products
PE-RT Pipe 5 Layer
PE-RT Pipe 3 Layer
1″ Stainless Steel Manifold with Automatic Air Vent
1″ Stainless Steel Manifold With AutomaticAir Vent
1” Stainless SteelManifold System Set
Circulation Pump – DN 25
Edge Insulation Tape 25m, 3mm x 100mm
Edge Insulation Tape 20m, 5mm x 100mm
U Clip Pipe Fixing Gun
