U Clip Pipe Fixing Gun

Technical Data Sheet

Product Name	U Clip Pipe Fixing Gun
Product Code	20.08.003
Average Working Life	3 Years
External Diameter of Pipes to be Used	16-20mm
Max. Thermal Insulation Board Density	75 kg/m³
Tool Height with spring released	930-1000 mm
Tool height with compressed spring	800-900 mm
Weight without u clip	2,150 kg
Max. Number of u clips that can be attached to the magazine	90 Pieces
U Clip gun whole body and magazine material	Aluminum
Spring Material	Galvanized Steel
Handle and tongue pusher material	Aluminum
Magazine pusher kit material	Aluminum
Handle cover material	Rubber

U Holders (9-10-11-12), magazine spring and storage apparatus are removed and placed on the magazine (8).
The position of the U Clip (13) should be on the horizontal part of the magazine (8) with its ends facing downwards.
To fix the underfloor heating pipe, U clips (pipe holders) placed on the magazine (8) part of the machine are used.
The pipe holder falls into the space between the body (1) and the tongue (2), where the ball (16) prevents the pipe holder from falling down.
When the pusher lever is pressed once, the U clip pipe holder (13) fixes the underfloor heating pipe to the insulation plate.
The U-clip pipe fixing gun should be used on the ground plane, with the lower wedge (15) inclined at an angle, as shown in the figure below.
You need to renew U Clips (Pipe Holders) periodically during operation.

Technical Information Brochure

Download

Do not attach more than 90 U clips (tube holders) to the magazine.
Reload when less than 5 U clips (tube holders) are held in the magazine. Otherwise the machine U clips will be compressed.
Use the clip gun on silencers with a density of up to 75 kg/m3.
Applying more than 50 N of vertical force to the thruster.
During the U-clip process, do not use products with dimensions other than the external U-clip (pipe holder) shown in the technical drawing.
The Stapler is used only in accordance with the instructions. Installation for direct use.
You can clean the clips. Parts do not need lubrication. Your components with the original packaging of the product.
Never stand completely when removing the magazine spring retainer.