Brass Manifold Set With Flow Meter

Technical Data Sheet

Product Name	Brass Manifold Set With Flow Meter
Standard	TSE K 534 / TSEK
Max. Operating Temperature	120°C
Pressure Class	PN 10
Intended Use	Heating Systems

Part Number	Part Name	Materials
1	Manifold Body	Brass
2	Flow Meter	High Quality Thermoplastic
3	Automatic Air Vent	Brass
4	Drain Cock	Brass
5	Holder	Steel
6	16×2 Pex Connection	Brass
7	Thermostatic Insert	Brass
8	Manuel Control Cap of Thermostatic Insert	ABS

Technical Information Brochure

Download

Be careful not to damage the product during transportation. Before assembly, do not remove it from the package until the moment of assembly to prevent foreign matter from entering the product that may affect its operation.
Clean any foreign matter in your installation before installation.
Make sure that the thread length to be connected to the collector is not longer than the thread length in the collector.
Keep the collector in the closed position during installation. Grasp the collector assembly from the wrench opening on the collector body using the appropriate wrench and assemble it.
When assembling the collector to the installation, be careful as excessive use of medication or linen affects the functionality of the product.
When opening and closing the collector, follow the arrow signs on the turning wheel.
Do not paint the product or contact it with corrosive chemicals.
Do not use any auxiliary tools during the collector opening-closing process.